Complete System · March 2026 Prices
6kW Hybrid Solar System
6kW Hybrid Solar System
Crown Xavier ii + Longi 610W + Crown Lithium
Pakistan ke liye designed complete solar solution — load shedding se mukammal azaadi, 25+ saal ki panels warranty aur 2-3 saal mein full investment return.
Crown Xavier ii 6kW Inverter
Crown 5.12kWh LiFePO4 Battery
12 × Longi HiMo7 610W Panels
L2 Galvanized Structure
Net Metering Ready
Professional Installation Lahore
Crown 5.12kWh LiFePO4 Battery
12 × Longi HiMo7 610W Panels
L2 Galvanized Structure
Net Metering Ready
Professional Installation Lahore
6kW
System capacity
7.32kW
Total panel output (12×610W)
5.12kWh
Battery backup storage
30 yr
Panel performance warranty
Detailed Cost Breakdown · Feb 2026
Component-wise Price Comparison
Note: Prices are based on Feb 2026 market rates from verified dealers in Pakistan. Prices may vary ±5% depending on location, stock availability and dealer. Contact us at 0332-4129441 for exact confirmed pricing.
| Component | Specification | Qty | Unit Price (PKR) | Our Price (PKR) |
|---|---|---|---|---|
| Crown Xavier ii Inverter | 6kW Hybrid, 6500W PV, 120A MPPT, 5″ LCD, Pure Sine Wave | 1 | 163,000–172,000 | 163,000 |
| Crown Lithium Battery | CMLB-51.2V 100Ah, 5.12kWh, LiFePO4, Wall-mounted, BMS included | 1 | 262,000–270,000 | 262,000 |
| Longi HiMo7 610W Panel | Bifacial, HPBC Cell, 21.3% efficiency, 25-yr warranty, N-type | 12 | 35/watt = 21,350/panel | 252,000 |
| L2 Galvanized Structure | Hot-dip galvanized, 25° tilt, for 12 panels, wind-resistant | 1 set | 28,000–35,000 | 28,000 |
| DC Solar Cable | 6mm² twin-core, UV-resistant, per system (~80 meters) | 1 set | 8,000–12,000 | 9,000 |
| MC4 Connectors & Junction Box | IP67 rated MC4 pairs, combiner box for 12 panels | 1 set | 3,500–5,000 | 3,500 |
| AC Output Cable | 4mm² copper, DB board connection, with breakers | 1 set | 5,000–8,000 | 5,500 |
| Earthing / Grounding Kit | AC + DC earthing rods, copper wire, clamps (safety requirement) | 1 set | 4,000–6,000 | 4,500 |
| DC Circuit Breaker (Fuse) | Solar DC fuse 32A, string protection | 1 set | 2,000–3,000 | 2,500 |
| Battery Cable (Lugs & Cable) | 25mm² copper, battery to inverter with terminal lugs | 1 set | 3,000–5,000 | 3,500 |
| Installation & Labour | Panel mounting, wiring, inverter commissioning, testing | 1 | 20,000–30,000 | 20,000 |
| TOTAL COMPLETE SYSTEM | Rs. 753,500 | |||
Price disclaimer: Above prices are based on verified market rates as of Feb 2026. Net metering application fee (LESCO: Rs. 15,000–25,000) is not included. Prices may vary by city and installer. Free site survey + exact quotation available — call 0332-4129441.
Summary Breakdown
Item-wise Cost at a Glance
Inverter
Crown Xavier ii 6kW Hybrid
Rs. 163,000
1-year warranty · MPPT 120A
Lithium Battery
Crown CMLB 51.2V 100Ah (5.12kWh)
Rs. 262,000
LiFePO4 · 6000+ cycles · BMS included
Solar Panels (12 units)
Longi HiMo7 610W Bifacial × 12
Rs. 252,000
Rs. 35/watt · 21,000/panel · 25yr warranty
Structure + Wiring + Install
L2 Structure + Cables + Labour
Rs. 76,500
Galvanized structure + DC/AC cable + earthing + labour
Product Detail · Inverter
Crown Xavier ii 6kW Hybrid Inverter — Specifications
| Parameter | Specification |
|---|---|
| Model | Crown Xavier ii 6kW (PV6500) |
| Rated Output Power | 6,000 W |
| Max PV Input | 6,500 W |
| MPPT Charger | Built-in 120A MPPT |
| Battery Voltage | 48V (compatible with 51.2V LiFePO4) |
| Output Waveform | Pure Sine Wave |
| Output Voltage | 220V AC, 50Hz |
| Display | 5-inch LCD with touchpad |
| Communication | Wi-Fi / RS485 / CAN |
| Working Modes | Solar Priority / Grid Priority / Battery Priority / Hybrid |
| Efficiency | >95% |
| Protection | Overload, Short Circuit, Over-temperature, Over-voltage |
| Grid Compatibility | LESCO / MEPCO / FESCO — net metering compatible |
| Warranty | 1 year (Crown Pakistan) |
| Price (Feb 2026) | Rs. 163,000 |
Product Detail · Lithium Battery
Crown CMLB-51.2V 100Ah Lithium Battery — Specifications
| Parameter | Specification |
|---|---|
| Model | Crown CMLB-51.2-100Ah (IP21) |
| Battery Chemistry | Lithium Iron Phosphate (LiFePO₄) |
| Nominal Voltage | 51.2V |
| Capacity | 100 Ah |
| Usable Energy | 5.12 kWh |
| Usable DoD | 80% (4.09 kWh usable) |
| Cycle Life | >6,000 cycles @ 80% DoD |
| Effective Lifespan | 10–15 years |
| Round-trip Efficiency | >95% |
| BMS | Built-in: Overcharge, Overdischarge, Overcurrent, Short-circuit, Temperature |
| Communication | CAN + RS485 (Crown Xavier ii compatible) |
| Mounting | Wall-mounted (indoor / covered outdoor) |
| Dimensions | Approx. 442 × 165 × 655 mm |
| Weight | ~35 kg |
| Scalability | Can be expanded with additional units in parallel |
| Backup Example | 800W load = ~4–5 hrs · 500W load = ~7–8 hrs |
| Price (Feb 2026) | Rs. 262,000 |
Product Detail · Solar Panels
Longi HiMo7 610W Bifacial Panels — Specifications (12 units)
| Parameter | Specification |
|---|---|
| Model / Series | Longi HiMo7 (LR5-72HGD-610M) |
| Cell Technology | HPBC (High Performance Back Contact) N-type |
| Panel Type | Bifacial Monofacial Glass-Glass |
| Peak Power (Pmax) | 610 Watts |
| Efficiency | 21.3% (panel level) |
| Open Circuit Voltage (Voc) | ~49.9V |
| Short Circuit Current (Isc) | ~15.6A |
| Max System Voltage | 1500V DC |
| Operating Temperature | -40°C to +85°C |
| Temperature Coefficient (Pmax) | -0.29%/°C |
| Annual Degradation | <0.45% per year |
| Product Warranty | 12 years (product) + 25 years (80% power) |
| Certifications | IEC 61215, IEC 61730, ISO 9001, MCS |
| Dimensions | ~2278 × 1134 × 35 mm |
| Weight per panel | ~28.5 kg |
| Total 12-panel peak output | 7,320 Watts (7.32 kW) |
| Daily generation (Lahore avg) | 25–30 kWh per day (8–9 sun hours) |
| Price per watt | Rs. 34–36/watt (market Feb 2026) |
| Price 12 panels (@ Rs. 35/W) | Rs. 252,000 |
Mounting System
L2 Structure — Complete Details & Specifications
L2 structure (L-section mounting system) solar panels ko roof par securely tilt karke lagane ka professional method hai. Ye galvanized iron ya aluminum ki bani hoti hai jo corrosion se protected hoti hai aur 15-20 saal tak durable rehti hai.
| Component | Material | Size / Spec | Purpose |
|---|---|---|---|
| L-Section Rails | Hot-dip galvanized iron | 40×40×4mm or 50×50×5mm | Main horizontal panel support rails |
| Vertical Legs / Stands | Galvanized iron box section | 40×40mm, adjustable height | Elevate back edge for 25–30° tilt angle |
| Panel Clamps (Mid & End) | Anodized aluminum | 35mm frame compatible | Secure panels to rails without drilling panels |
| Roof Anchors / Brackets | Stainless steel bolts + rubber seal | M8 / M10 bolts | Attach structure to RCC roof, waterproof seal |
| Cross Bracing | Galvanized flat bar | 25×4mm | Wind load resistance — prevents lateral movement |
| Grounding Lug | Stainless steel | M6 lug | Connect structure to earth wire for lightning protection |
L2 Structure Layout for 12 Panels
| Row | Panels per Row | Orientation | Tilt Angle | Estimated Roof Area |
|---|---|---|---|---|
| Row 1 | 4 panels | Portrait (vertical) | 25–30° | ~10 m² |
| Row 2 | 4 panels | Portrait (vertical) | 25–30° | ~10 m² |
| Row 3 | 4 panels | Portrait (vertical) | 25–30° | ~10 m² |
| Total roof area required | ~38–45 m² | |||
| Recommended roof direction | South-facing | |||
Pro tip: Rows ko shade se bachayein — pani ki tanki, darakhton ya paros ki imarat ki shadow panels par na parey. Har row ke darmiyan 1.5–2 meter ka faasla rakhein taake row-to-row shading na ho aur cleaning ke liye access bhi miley.
Installation Guide
Step-by-Step Wiring Instructions
⚠ Warning: Solar DC wiring ko sirf trained electrician kare. DC voltage 600–900V tak ho sakta hai jo deadly hai. Agar aap trained nahin hain to professional installer hire karein. Pak Solar Traders ki team full installation service provide karti hai.
1
Main Supply OFF karo
Installation shuru karne se pehle ghar ka WAPDA main breaker off karo aur lock/tag karo. Battery terminals bhi cover rakho. Dry gloves aur safety glasses pehno.
2
L2 Structure Assemble karo
L-section rails, vertical legs aur cross bracing assemble karo. Roof anchors ke liye RCC mein M10 rawl bolts drill karo. Rubber gasket lagao taake paani ander na aye. Structure ko earth wire se connect karo.
3
Panels Mount karo
Panels ko structure par rakh kar mid-clamps aur end-clamps se secure karo. Tilt angle 25–30° rakho. Har panel ke frame ko structure se earth karo (green wire). Panels ko abhi connect na karo — pehle complete wiring check kar lo.
4
String Wiring (DC) — Panel to Inverter
12 panels ko 2 strings mein wire karo: String 1 = 6 panels series (+ to – daisy chain), String 2 = 6 panels series. Each string voltage approx. 6 × 49.9V = 299V DC. MC4 connectors use karo. String wire (6mm² red/black) conduit mein daal kar roof se inverter location tak lao. DC circuit breaker/fuse (32A) laga do.
5
Battery Connection
Crown lithium battery ko inverter ke BATTERY terminals se connect karo. 25mm² copper cable use karo — Red (+) aur Black (–). Battery BMS communication cable (RS485 ya CAN) inverter ke communication port mein lagao. Battery ka maximum distance inverter se 2 meter rakho.
6
AC Grid Connection
Inverter ke AC-IN port ko WAPDA grid se connect karo (4mm² wire, through AC breaker). Inverter ke AC-OUT port ko ghar ke DB board se connect karo. Bypass switch bhi lagao taake agar inverter fail ho to direct WAPDA supply mil sake.
7
Earthing / Grounding
AC Earthing: DB board earth bar se inverter earth terminal tak (4mm² green-yellow wire). DC Earthing: Panel frames + L2 structure se earth rod tak (6mm² green wire). Earth rod (copper-clad 1.8m) zameen mein gaad do aur resistance <10 ohm check karo.
8
Commissioning & Testing
Sab connections double-check karo. Battery ON karo, phir DC breaker ON karo — inverter LCD ON hoga. Inverter settings check karo: battery type = Lithium, battery capacity = 100Ah, working mode = Solar First. AC grid connect karo aur monitoring app setup karo.
How To Use
Solar System Usage Instructions — Rozana ke liye Guide
Morning Startup
Subah sunrise ke baad inverter automatically solar mode mein chala jayega. LCD display par PV power, battery level aur load dekh sakte hain. Koi manual action zaruri nahin.
Daytime Operation
“Solar First” mode mein panels seedha load chalate hain. Extra solar energy battery charge karti hai. Grid se bijli sirf tab leti hai jab solar + battery kaafi na ho.
Load Shedding
Grid jaate hi inverter automatically battery + solar par switch ho jata hai. 20ms se kam transition time hai — appliances band nahin honge. Battery 80% DoD tak use hogi.
Night Time
Raat ko battery se backup milta hai. Battery discharge hone par grid se supply automatically shuru hoti hai. Morning mein panels phir battery charge karte hain.
Battery Care
LiFePO4 battery ko 100% discharge na karo. 20% se upar rakho. Garam jagah (50°C+) par na rakho. BMS automatically protect karta hai — manually battery disconnect karne ki zarurat nahin.
Panel Cleaning
Maheene mein ek baar panels saaf karo. Subah sooraj nikalne se pehle ya shaam dhoop utarne ke baad. Saada pani aur naram kapra use karo. Soap / chemical na use karo jo coating damage kare.
Monitoring App
Crown inverter ke Wi-Fi / RS485 se app connect karo. Har roz generation, consumption aur savings track karo. App Android aur iOS dono par available hai.
Annual Check
Saal mein ek baar technician se MC4 connectors, cable connections aur structure bolts check karayen. Loose connections se fire risk hoti hai. Pak Solar Traders AMC package available hai.
Load Management
Ek waqt mein 6000W se zyada load na daalo. Heavy appliances (geyser, iron, AC) ek saath na chalayen. Inverter overload protection hai lekin regular overload inverter ko damage kar sakta hai.
Safety First
Safety Guidelines — Solar System ke liye Zaroori Hidayat
⚡
DC Voltage — Khatra
Solar panels dhoop mein 300–900V DC produce karte hain. Kabhi bhi live DC wires ko bare haath se touch na karo. Sirf certified electrician DC kaam kare.
🔥
Fire Prevention
Loose MC4 connections ya damaged cables arc fault aur fire cause kar sakti hain. Sab connections tight karo aur UV-rated cable use karo. Koi bhi damage hua cable turant replace karo.
🌩
Lightning Protection
Badal wali raat mein agar bijli girne ki possibility ho to AC breaker off kar do. DC surge protector (SPD) lagayen. Panel structure ko proper earth karo.
💧
Water & Moisture
Inverter aur battery ko barish aur seep se bachao. Indoor ya covered area mein rakho. Cable entries ko silicone seal karo. IP21 battery ko outdoor mein directly na rakho.
🛠
DIY Se Bachein
YouTube dekh kar khud wiring na karo. Galat wiring se inverter, battery ya panels ka warranty void hota hai aur jaan ka khatra bhi hota hai. Professional installer hire karo.
👶
Bachon se Door Rakho
Battery room aur inverter area ko lock rakho. Bachon ko cables ya terminals touch na karne dein. Warning labels laga dein. Emergency mein main breaker ki location ghar mein sabko pata ho.
🔧
Maintenance Safety
Panel cleaning ke waqt rubber-soled shoes pehno. Roof par kaam karte waqt safety rope use karo. Panels saaf karne se pehle DC breaker off karo ya dawn/dusk mein karo jab voltage minimum ho.
📞
Emergency Contact
Koi bhi fault, smoke ya unusual smell aye to turant main breaker off karo aur Pak Solar Traders ko call karo: 0332-4129441. WAPDA faults ke liye LESCO helpline: 118.
Aksar Pochhe Jane Wale Sawal
FAQ — 6kW Solar System Pakistan
6kW solar system ki total cost kya hai Pakistan mein?
Crown Xavier ii 6kW inverter (Rs. 163,000) + Crown CMLB 5.12kWh Lithium Battery (Rs. 262,000) + 12x Longi 610W panels (Rs. 252,000) + L2 structure, wiring & installation (Rs. 76,500) = Total Rs. 7,53,500 (Feb 2026). Net metering fee (Rs. 15,000–25,000 extra) included nahin. Free quotation ke liye call karein: 0332-4129441.
Crown Xavier ii 6kW inverter ki kya khasiyat hai?
Crown Xavier ii 6kW hybrid inverter 6,500W PV input support karta hai, built-in 120A MPPT solar charger hai, pure sine wave output deta hai, 5-inch LCD touchpad ke saath aata hai, Wi-Fi monitoring support hai, aur grid aur off-grid dono modes mein kaam karta hai. Market price Rs. 140,000–163,000 hai.
Crown Lithium battery 5kW kitne ghante backup deti hai?
Crown CMLB 51.2V 100Ah (5.12 kWh) LiFePO4 battery 800W–1000W load par approximately 4–5 ghante ka backup deti hai. Kam load (500W) par 7–8 ghante tak backup milta hai. Battery 6,000+ charge cycles ki life hai — roughly 15+ saal.
Longi 610W panels 6kW system ke liye kaafi hain?
Haan, 12 × 610W = 7,320W total. Ye Crown Xavier ii ke 6,500W PV input se 12% zyada hai — ye “over-sizing” standard practice hai jo cloudy days aur low-sun periods mein bhi maximum generation ensure karta hai.
L2 structure kya hoti hai aur kiyon zaruri hai?
L2 galvanized iron structure solar panels ko roof par 25–30° angle par securely mount karti hai. Ye wind load handle karti hai, optimum tilt se 15–20% zyada generation milti hai, aur panels ki life badhti hai. 12 panels ke liye ek complete set Rs. 28,000 mein available hai.
6kW solar system par konse appliances chala sakte hain?
2–3 inverter ACs (1.5 ton), 10–12 fans, 30 LED lights, 1–2 fridges, 1 washing machine, LED TVs aur chargers — sab ek saath. Total load 6,000W se kam rakhen. Lithium battery se raat ko bhi fans, lights aur fridge 4–6 ghante chala sakte hain.
Solar system ka ROI kitne saal mein milta hai Lahore mein?
Agar bijli bill Rs. 25,000–35,000/month ho to annual saving Rs. 3,00,000–4,20,000 ban sakti hai. Rs. 7,53,500 investment par ROI 2–2.5 saal mein ho jata hai. Panels ki 25-saal warranty hai — baaki 22+ saal pure savings hain.
Net metering kaise apply karen LESCO Lahore mein?
LESCO net metering ke liye: (1) Licensed installer se system install karayen, (2) Inverter specs aur installation certificate taiyar karein, (3) LESCO net metering portal par online apply karein ya SDO office visit karein, (4) LESCO inspector site visit karega, (5) Bidirectional meter install hoga. Process 4–8 weeks leta hai. Fee approximately Rs. 15,000–25,000. Pak Solar Traders poori assistance provide karta hai.
Free Site Survey Book Karein — Lahore
Aaj call ya WhatsApp karein. Free roof survey, exact quotation, aur zero-pressure consultation available hai.